- Graphtec Drivers Windows 7
- Graphtec Driver Download
- Graphtec Drivers Windows 10
- WINDOWS DRIVER INSTALLATION - Graphtec America, Inc
On driver and software, the file is compressed in the ZIP format. It is required to decompress before use. On driver and software, it is for the Windows-based PC. In GL200, GL800 and GL900, the firmware needs to be updated when the latest software is used in Windows 7. Please follow the instructions when the firmware is updated. You can download by either clicking the 'Download' button. From the File Download window, verify that 'Save' is selected and click OK. Do not rename the file you're downloading, it may cause installation problems. Want to know if CADlink supports your device? Search supported output devices here. You can add these drivers through your compatible program. PLEASE NOTE – NOT ALL OUTPUT DEVICES ARE SUPPORTED IN EACH APPLICATION. Contact your local dealer or sales@cadlink.com for more information on your device compatibility. SUPPORTED PRINTERS Below you will find the.
Support > Software & Drivers
Cutting Plotters
Software & Drivers
Go to the driver section : Windows driver
Go to the softwares (1) section : Controller, ROBO Master Pro, D-Cut Master
Go to the softwares (2) section : Cutting Master 4, Graphtec Pro Studio, Cutting Master 2, Cutting Master 3, Graphtec Studio
* FC9000, go to the product support page.
* CE7000, go to the product support page.
* CE7000-130AP, go to the product support page.
* CE LITE-50, go to the product support page.
* CE6000 PLUS, go to the product support page.
* FCX2000, go to the product support page.
* FCX4000, go to the product support page.
Drivers
| Cutting Plotters | Windows Driver | ||||||
|---|---|---|---|---|---|---|---|
| Windows 7 (32-bits Edition) | Windows 8.1 (32-bits Edition) | Windows 10 (32-bits Edition) | Windows 7 (64-bits Edition) | Windows 8.1 (64-bits Edition) | Windows 10 (64-bits Edition) | Cprrespon- ding model | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | CE6000 | ||
| CE6000-120AP | OPS628 (v10.20) | OPS628 (v10.30) | OPS628 (v10.20) | OPS628 (v10.30) | CE6000 | ||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS662 (v3.80) | OPS662 (v4.00) | OPS662 (v3.80) | OPS662 (v4.00) | FC8600 | ||
| FC2250-60 FC2250-120 FC2250-180 | FC2250 | ||||||
| FC4500-50 FC4510-60 FC4550-50 | FC4500 | ||||||
| CE2000-60 CE2000-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | CE2000 | ||
| CE2000-120AP | CE2000 | ||||||
| CE3000-40 CE3000-60 CE3000-120 | CE3000 | ||||||
| CE3000-120AP | CE3000 | ||||||
| CE3000Mk2-60 CE3000Mk2-120 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | CE3000Mk2 | ||
| CE5000-60 CE5000-120 | OPS662 (v3.00) | OPS662 (v3.00) | CE5000 | ||||
| CE5000-120AP | OPS628 (v10.20) | OPS628 (v10.20) | CE5000 | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC2230 | ||
| FC2240-60 FC2240-120 FC2240-180 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC2240 | ||
| FC3600-120 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC3600 | ||
| FC4200-50 FC4200-60 FC4210-60 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC4200 | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC5100 | ||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | FC5100 | ||||||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS662 (v3.00) | N/A | OPS662 (v3.00) | N/A | FC7000 | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | FC7000 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS662 (v3.00) | OPS662 (v3.00) | FC8000 | ||||
| FC612-09 | OPS628 (v10.20) | N/A | OPS628 (v10.20) | N/A | FC612 | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
Softwares
| Cutting Plotters | Cutting Plotter Controller | ROBO Master Pro | D-Cut Master | |||
|---|---|---|---|---|---|---|
| Windows 7 / 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | Windows 7 (32 & 64-bits Edition) | Windows 8.1 / 10 (32 & 64-bits Edition) | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | OPS676 (v1.40B) | N/A | N/A | |||
| Firmware version 1.60 is required (CE6000 Firmware v2.61) Manual for CE6000-40/60/120/120AMO (CE6000-UM-152-01) | ||||||
| CE6000-120AP | N/A | N/A | N/A | |||
| Firmware version v1.50 is required (CE6000-120AP Firmware v2.00) User manual for CE6000-120AP (CE6000AP-UM-152-01) | ||||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC2250-60 FC2250-120 FC2250-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC4500-50 FC4510-60 FC4550-50 | ||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | |||
| CE2000-120AP | N/A | N/A | N/A | |||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | |||
| CE3000-120AP | N/A | N/A | N/A | |||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | |||
| CE5000-60 CE5000-120 | OPS664 (v2.20B) | OPS661 (v4.60) | N/A | N/A | ||
| CE5000-120AP | N/A | N/A | N/A | |||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC3600-120 | N/A | N/A | N/A | |||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | OPS639 (v2.12) | N/A | ||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | |||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | |||
| FC7000-75 FC7000-100 FC7000-130 FC7000-160 | OPS664 (v2.20B) | N/A | N/A | N/A | ||
| FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 | ||||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | OPS675 (v1.50B) | N/A | N/A | |||
| FC612-09 | N/A | N/A | OPS639 (v2.12) | N/A | ||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
Softwares
| Cutting Plotters | Cutting Master 4 | Graphtec Pro Studio | |
|---|---|---|---|
| Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | Macintosh OS10.7 - 10.15 | Windows 7 / 8.1 / 10 (32 & 64-bits Edition) | |
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| FC4500-50 FC4510-60 FC4550-50 | Cutting Master 4 for Windows | Cutting Master 4 for Macintosh | Graphtec Pro Studio for Windows |
| Cutting Plotters | Cutting Master 2 | Cutting Master 3 | Graphtec Studio | ||||
|---|---|---|---|---|---|---|---|
| Windows 7/ 8.1 (32 & 64-bits Edition) | Windows 10 (32 & 64-bits Edition) | Macintosh OS10.4 - 10.10 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.5 -10.11 macOS 10.12 | Windows 7/ 8.1/ 10 (32 & 64-bits Edition) | Macintosh OS10.6 -10.15 | |
| CE6000-40 CE6000-60 CE6000-120 CE6000-120AMO | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| CE6000-120AP | N/A | N/A | N/A | ||||
| FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 2.10 or later is required (FC8600 Firmware v3.10) | |||||||
| FC2250-60 FC2250-120 FC2250-180 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.90 or later is required (FC2250 Firmware v4.50) | |||||||
| FC4500-50 FC4510-60 FC4550-50 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 1.92 or later is required (FC4500 Firmware v2.70) | |||||||
| CE2000-60 CE2000-120 | N/A | N/A | N/A | ||||
| CE2000-120AP | N/A | N/A | N/A | ||||
| CE3000-40 CE3000-60 CE3000-120 | N/A | N/A | N/A | ||||
| CE3000-120AP | N/A | N/A | N/A | ||||
| CE3000Mk2-60 CE3000Mk2-120 | N/A | N/A | N/A | ||||
| CE5000-60 CE5000-120 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows> | Graphtec Studio for Macintosh |
| When current firmware is previous of version 3.80, version 3.90 is required (CE5000 Firmware v4.00) When current firmware is version 5.00 or later, version 6.20 is required (CE5000 Firmware v6.40) | |||||||
| CE5000-120AP | N/A | N/A | N/A | ||||
| FC2231-60 FC2231-90 FC2321-EX FC2232-60 FC2232-90 FC2232-EX | N/A | N/A | N/A | ||||
| FC2240-60 FC2240-120 FC2240-180 | N/A | N/A | N/A | ||||
| FC3600-120 | N/A | N/A | N/A | ||||
| FC4200-50 FC4200-60 FC4210-60 | N/A | N/A | N/A | ||||
| FC5100-75 FC5100-100 FC5100-130 FC5100-150 | N/A | N/A | N/A | ||||
| FC5100A-75 FC5100A-100 FC5100A-130 FC5100A-150 | N/A | N/A | N/A | ||||
| FC8000-60 FC8000-75 FC8000-100 FC8000-130 FC8000-160 | C-Master2(W) (v2.00) | TBD | C-Master2(M) (v1.99) | Cutting Master 3 for Windows | Cutting Master 3 for Macintosh | Graphtec Studio for Windows | Graphtec Studio for Macintosh |
| Firmware version 3.10 or later is required (FC8000 Firmware v3.50) | |||||||
| FC612-09 | N/A | N/A | N/A | ||||
Notes/Explanations:
- 1.
- On driver and software, the file is compressed in the ZIP format. It is required to decompress before use.
- 2.
- On driver and software, the language is in English.
- 3.
- On driver and software, the Macintosh OS is not supported exclude the Cutting Master 2 plug-in software.
- 4.
- On software, it is run in the WOW64 mode when the 64-bits Windows OS is used.
- 5.
- In plug-in software Cutting Master 2 and Cutting Master 3, new version will not be released even if the OS or application software is updated. It is recommended using plug-in software Cutting Master 4 corresponded to new OS or application software if possible.
FIRMWARE UPDATE
Firmware Can be Updated via Windows OS
Only using a USB Port Exclusively
Items needed are the following:
1. Windows Driver for Selected Cutter Model
- View Windows Driver install video below*
*FC9000 and CE7000 Models have separate video
Graphtec Drivers Windows 7
2. Firmware Files for Selected Cutter Model.
- Find latest Firmware for your model below
Graphtec Driver Download
FIRMWARE/DRIVERS FOR CURRENT MODELS ▼
Graphtec Drivers Windows 10
FC9000 Series
CE7000 Series
CE7000-130AP
CE6000 Series
CE6000 Plus
CE6000-120AP
FC4500 Series
FCX2000 Series
FCX4000 Series
F-MARK2
CE Lite-50
FIRMWARE/DRIVERS FOR LEGACY MODELS ▼
FC8600 Series
FC8000 Series
FC7000 MK2 Series
FC7000 Series
Automatic Sheet Cutter (ASC)
FC5100 Series
FC5100A Series
CE5000 Series 60-120
CE5000-40 Craft ROBO Pro
FC4500 Series
FC4210-60 Series
FC4200 Series
CE3000 Series
CE3000 MK2
CE3000 120AP
FC2250 Series
WINDOWS DRIVER INSTALLATION - Graphtec America, Inc
- Windows Driver Setup